Select Board & Class

Login

Refraction of Light

Refraction of light and speed of light

Ankit went to an optician and noticed different types of spectacles there. He observed that while the glasses of some spectacles were relatively thicker in the middle, other glasses were thicker on the edge. The glasses of these spectacles are examples of lenses.

A lens is a transparent material bound by two curved surfaces. Lenses are broadly classified into two categories depending on their surfaces.

However, we will discuss only double spherical lenses here.

Convex lens

A convex lens is made by joining two spherical surfaces in such a way that it is thicker at the centre. Its thickness gradually reduces as we move towards the edge.

               

A convex lens has the ability to converge the light rays to a point that are incident on it. Thus, it is called a converging lens.

Concave lens

A concave lens is made by joining two curved surfaces in such a way that it is thinner at the centre. Its thickness gradually increases as we move towards the edge.

                     

A concave lens has the ability to diverge a beam of light rays incident on it. Thus, it is called a diverging lens.

Differences between a spherical mirror and a lens

The following table lists some common differences between spherical mirrors and lenses

Spherical mirror

Spherical lens

Image is formed by reflection of light.

Image is formed by refraction of light.

A spherical mirror has only one focus.

A spherical lens has two foci.

The centre of the spherical mirror is termed as its pole.

The centre of the spherical lens is termed as its optical centre.

The second difference arises due to the fact that a lens has two spherical surfaces (i.e. it can be made from the arc of two spheres of equal radius).Therefore, light is refracted twice before it comes out of the lens.

Terms Associated with Lenses:

Optical centre

Optical centre is a point at the centre of the lens. It always lies inside the lens and not on the surface. It is denoted by ‘O’.

Centre of curvature

It is the centre point of arcs of the two spheres from which the given spherical lens (concave or convex) is made. Since a lens constitutes two spherical surfaces, it has two centers of curvature.

The distance of the optical centre from either of the centre of curvatures is termed as the radius of curvature.

Principal axis

The imaginary straight line joining the two centers of curvature and the optical centre (O) is called the principal axis of the lens.

Hold a convex lens and direct it against the sunlight. You will find a bright spot appear on the wall. Can you explain the formation of this bright spot? Light, after refracting through the lens, converges at a very sharp point. Try to obtain the brightest possible spot. Now, place a paper on the wall and observe what happens in the next few minutes.

Focus

The focus (F) is the point on the principal axis of a lens where all incident parallel rays, after refraction from the lens meet or appear to diverge from. For lenses there are two foci (F1 and F2) depending on the direction of incident rays.

        

The distance between the focus (F1 or F2) and the optical centre (O) is known as the focal length of the lens.

        

Refraction by Spherical Lenses

Refraction by a spheric…

To view the complete topic, please

What are you looking for?

Syllabus