Call me

Have a Query? We will call you right away.

+91

E.g: 9876543210, 01112345678

We will give you a call shortly, Thank You

Office hours: 9:00 am to 9:00 pm IST (7 days a week)

What are you looking for?

Syllabus

what is the difference between resistance and resistivity???/

A current of 0.15A flows through a 20 ohm resistor away from a point in a circuit where the potential is 45 volts. What is the potential at the other end of the resistor?

Can You Give Me Some Examples Of Ohmic And Non Ohmic Materials And Please These 2 Terms Also.

No Copy Please Because I Could Search ON Net On Myself Also

θthrough which a pulley turns with timetis specified by the functionθ=t^{2}+ 3t– 5. Find the angular velocity $\omega =\frac{d\theta}{dt}\mathrm{at}t=5\mathrm{sec}$.Define 1 Coulomb??

give all formula in chapter electricity

Two heater wires of same length and material but of different thickness are connected in series across a power supply. Thus power dissipated is more in which one and why?

why is ammeter connected in series and voltmeter in parallel?

a 100W an 500W bulb are joined in parallel to the mains. which bulb will glow brighter?

Write the chemical name and formula of bleaching powder. How is it prepared

Two wires of same length and area, made of two materials of resistiveity P

_{1}and P_{2}are connected in parallel to a source of potential. The equivalent resistivity for the same length and area isρ_{1}ρ_{2}/(ρ_{1}+ρ_{2}).But if the same wires are in series, then;

ρ

_{s}2l/A= (ρ_{1}+ρ_{2}) l/AThereforeρ

_{s}= (ρ_{1}+ρ_{2})/2 [Since in series the length is doubled]Similarly, shouldn't the area of cross section of the wires when placed in parallel too be doubled? On doubling the area;

ρ

_{3}l/2A_{}= {ρ_{1}ρ_{2}^{}_{*l/A}/(ρ_{1}+ρ_{2})}Thereforeρ

_{3}= 2ρ_{1}ρ_{2}/ (ρ_{1}+ρ_{2})But this is not so. Could you please explain in detail the contradiction?

define one coulomb of charge?

21. The current through

(A) branch DE is 1A (B) branch BC is 2A

(C) branch BG is 4A (D) branch HG is 6A

22. The emf E of the battery is

(A) 24 V (B) 12 V (C) 18 V (D) 6V

a 4 ohm resistance wire is doubled on it calculate the new resistance of the wire

(A) 42 V (B) 32 V

(C) 22 V (D) 20 V

what is the difference between an open and closed circuit? (3 points of difference)

Resistance of a metal wire of length 1m is 26 ohm at 20 degree centigrade. If the diameter is 0.3 mm, what is the resistivity?

pls answer......thanks!!!

Instructions: Read the given information carefully and answer the questions that follow:

1) The resistivity of copper is less than that of aluminum which, in turn is less than that of constantan.

2) There are nine wires, labeled as A, B, C, D, E, F, G, H, I, that have been designed as per the tabular details given below:

WIRE LENGTH DIAMETER MATERIAL RESISTANCE2) B 2l d Constantan R2

3) C 3l d Constantan R3

4) D l d Copper R4

5) E l 2d Copper R5

6) F l 3d Copper R6

7) G l d/2 Copper R7

8) H l d/2 Constantan R8

9) I l d/2 Aluminum R9

Answer the following questions:

1. Arrange the three values R1, R2, R3 in increasing order.

2. Arrange the three valuesR7, R8, R9 in decreasing order.

3. Which of the two has a lower value

a) R4 and R6

b) R1 and R8

4. Will the graph between R1, R2, R3 ( on the y-axis) and their corresponding length values ( on the x-axis ) be a straight line?

5. What is the likely value of the ratio R4/R6?

Why voltmeter is always connected in parallel combination

why is resistance more in series combination and less in parallel combination

what are the applications of Heating effects of electric current . [ joules heating ]

The following instruments are available in a laboratory : Milliammeter A1 : range 0-300 mA and least count 10 mA Milliammeter A2 : range 0-200 mA and least count 20 mA Voltmeter V1 : range 0-5 V and least count 0.2 V Voltmeter V2 : range 0-3 V and least count 0.3 V Out of the above instruments, which pair of milliammeter and voltmeter would be the best choice to determine the equivalent resistance of two resistors connected in series ? (a) Milliammeter A1 and Voltmeter V1 (b) Milliammeter A2 and Voltmeter V2 (c) Milliammeter A1 and Voltmeter V2 (d) Milliammeter A2 and Voltmeter V1

A piece of wire of resistance 20 ohm is drawn out so that its length is increased to twice its original length. Calculate the resistance of the wire in the new situation?

^{-1}equals(a) 1NC

^{-1}(b) 1NC

^{-1}(c) 1Jm

^{-1}(d) 1Jm

^{-2}define one ohm.

two wires,one of copper and other of manganin, have equal lengths and equal resistances.Which wire is thicker ?Given that resistivity of copper is lower than that of manganin

A wire of resistance 10 ohm is bent in the form of a closed circle . What is the effective resistance between the points at the ends of any diameter of a circle ?

A metallic conductor has loosely bound electrons called free electrons. The

metallic conductor is(a) negatively charged (b) positively charged(c) neutral (d) Either positively charged or negatively chargedWhy does the cord of an electric heater not glow while the heating element does?

NUMERICALS ON ELECTRICITY1.The current passing through a room heater has been halved. What will happen to the heat produced by it?

2.An electric iron of resistance 20 ohm draws a current of 5 amperes. Calculate the heat produced in 30 seconds.

3.An electric heater of resistance 8 ohm takes a current of 15 A from the mains supply line. Calculate the rate at which heat is developed in the heater.

4.A resistance of 40 ohms and one of 60 ohms are arranged in series across 220 volt supply. Find the heat in joules produced by this combination in half a minute.

5.A resistance of 25 ohm is connected to a 12 V battery. Calculate the heat energy in joules generated per minute.

6.100 joules of heat is produced per second in a 4 ohm resistor. What is the potential difference across the resistor?

7.An electric iron is connected to the mains power supply of 220 V. When the electric iron is adjusted at minimum heating it consumes a power of 360 W but at maximum heating it takes a power of 840 W. Calculate the current and resistance in each case.

8.Ten bulbs are connected in a series circuit to a power supply line. Ten identical bulbs are connected in a parallel circuit to an identical power supply line.

a)Which circuit would have the highest voltage across each bulb

b)In which circuit would the bulbs be brighter?

c)In which circuit, if one bulb blows out, all others will stop glowing?

d)Which circuit would have less current in it?

9.Calculate the cost of operating a heater of 500 W for 20 hours at the rate of Rs. 3.90 per unit.

10.Which has a greater resistance, a 100 watt bulb or a 60 watt bulb?

11.How much energy is consumed when a current of 5 amperes flows through the filament (or element) of a heater having resistance of 100 ohms for two hours? Express it in joules.

12.An electric bulb is rated at 220 V, 100 W. What is its resistance?

13.An electric bulb is connected to a 220 V power supply line. If the bulb draws a current of 0.5 A, calculate the power of the bulb.

14.In which of the following cases more electrical energy is consumed per hour?

a)A current of 1 ampere passed through a resistance of 300 ohms

b)A current of 2 amperes passed through a resistance of 100 ohms.

15.Electric kettle rated at 220 V, 2.2 kW, works for 3 hours. Find he energy consumed and the current drawn. W

16.In a house two 60 W electric bulbs are lighted for 4 hours, and three 100 W bulbs for 5 hours everyday. Calculate the electric energy consumed in 30 days.

17.If the potential difference between the ends of a wire of fixed resistance is doubled, by how much does the electric power increase?

18.A bulb is rated as 250 V; 0.4 A. Find its : (i) power, and (ii) resistance.

19.For a heater rated at 4 kW and 220 V, calculate (a) the current, b) the resistance of the heater, ) the energy consumed in 2 hours, and d) the cost if 1 kWh is priced at Rs. 4.60.

20.An electric motor takes 5 amperes current from a 220 volt supply line. Calculate the power of the motor arid electrical energy consumed by it in 2 hours.

21.Which uses more energy: a 250 W TV set in 1 hour or a 1200 W Toaster in 10 minutes?

22.An electric bulb is rated as 10 W, 220 V. How many of these bulbs can be connected in parallel across the two wires of 220 V supply line if the maximum current which can be drawn is 5 A.

23.How much work is done in moving a charge of 2 coulombs from a point at 118 volts to a point at 128 volts?

24.What possible values of resultant resistance one can get by combining two resistances, one of value 2 ohm and the other 6 ohm?

25.If 3 resistances of 3 ohm each are connected in parallel, what will be their total resistance?

26.Three resistors are connected as shown in the diagram. Through the resistor 5 ohm, a current of 1 ampere is flowing.

a)What is the current through the other two resistors?

b)What is the p.d. across AB?

c)What is the total resistance?

27.Two resistances are connected in series as shown in the diagram:

a)What is the current through the 5 ohm resistance?

b)What is the current through R?

c)What is the value of R?

d)What is the value of V?

28.In the diagram shown alongside, the cell and the ammeter both have negligible resistance. The resistors are identical. With the switch K open, the ammeter reads 0.6 A. What will be the ammeter reading when the switch is closed?

29.In the circuit diagram shown alongside, find

a)Total resistance.

b)Current shown by the ammeter A

30.Two resistances when connected in parallel give resultant value of 2 ohm; when connected in series the value becomes 9 ohm. Calculate the value of each resistance.

31.For the circuit shown in the diagram alongside What is the value of:

a)Current through 6 f resistor?

b)Potential difference across 12 resistors?

32.How should the two resistances of 2 ohms each be connected so as to produce an equivalent resistance of 1 ohm?

33.A resistor of 8 ohms is connected in parallel with another resistor X. The resultant resistance of the combination is 4.8 ohms. What is the value of the resistor X?

34.You are given three resistances of 1, 2 and 3 ohms. Show by diagrams, how with the help of these resistances you can get

35.If five resistances, each of value 0.2 ohm, are connected in series, what will be the resultant resistance?

36.Four resistances of 16 ohms each are connected in parallel. Four such combinations are connected in series. What is the total resistance?

37.The circuit diagram alongside shows the combination of three resistors R

_{1}, R_{2}and R_{3}: Find :a)Total resistance of the circuit.

b)Total current flowing in the circuit.

c)the potential difference across R

38.In the circuit diagram given alongside, the current flowing across 5 ohm resistor is 1 amp. Find the current flowing through the other two resistors.

39.An electric bulb of resistance 20 and a resistance wire of 4 are connected in series with a 6 V battery. Draw the circuit diagram and calculate

a)Total resistance of the circuit.

b)Current through the circuit.

c)Potential difference across the electric bulb.

d)Potential difference across the resistance wire.

40.How will you connect three resistors of 2 ohm, 3 ohm and 5 ohm respectively so as to obtain a resultant resistance of 2.5 ohm? Draw the diagram to show the arrangement.

41.In the circuit diagram given alongside five resistances are connected as shown to a 12 V battery. Calculate.

a)Total resistance in the circuit.

b)Total current flowing in the circuit.

42.How will you connect three resistors of resistances 2ohm, 3 ohm and 6 ohm to obtain a total resistance of: (a) 4 ohm, and (b) 1 ohm?

43.A wire of resistance R is cut into five equal pieces. These five pieces of wire are then connected in parallel. If the resultant resistance of this combination be R then the ratio of resultant to the original will be?

44.In the circuit diagram given alongside, three resistors are connected as shown. Calculate

a)Current through each resistor.

b)Total current in the circuit.

c)Total resistance in the circuit.

45.A copper wire has a diameter of 0.5 mm and resistivity of 1.6 x 10 m.

a)What will be the length of this wire to make its resistance 10 2ohm?

b)How much does the resistance change if the diameter is doubled?

46.An electric heater which is connected to a 220 V supply line has two resistance coils A and B of 24 resistances each. These coils can be used separately (one at a time), in series or in parallel. Calculate the current drawn when

a)Only one coil A is used.

b)Coils A and B are used in series.

c)Coils A and B are used in parallel.

47.If the length of a wire is doubled by taking more of wire, what happens to its resistance?

48.How does the resistance of a wire change when

a)Its length is tripled?

b)Its diameter is tripled?

c)Its material is changed to one whose resistivity is three times?

49.How much energy is given to each coulomb of charge passing through a 6 V battery?

50.The potential difference between the terminals of an electric iron is 240 V and the current is 5.0 A. What is the resistance of the electric iron?

51.A potential difference of 20 volts is applied across the ends of a resistance of 5 ohms. What current will flow in the resistance?

52.A resistance of 20 ohms has a current of 2 amperes flowing in it. What potential difference is there between its ends?

53.A current of 5 amperes flows through a wire whose ends are at a potential difference of 3 volts. Calculate the resistance of the wire.

54.The resistance of an electric lamp filament is 230 ohms. The lamp is switched on when the line voltage is 115 volts. What is the current in the lamp circuit?

55.What is the potential difference between the ends of a conductor of 16 ohm resistance, when a current of 1.5 A flows through it?

56.Calculate the work done in moving a charge of 4 coulombs from a point at 220 volts to another point at 230 volts.

57.What is the potential difference between the terminals of a battery if 250 joules of work is required to transfer 20 coulombs of charge from one terminal of the battery to the other?

58.How much work is done in moving a charge of 2 C across two points having a potential difference of 12 V?

59.An electric bulb draws a current of 0.25 A for 20 minutes. Calculate the amount of electric charge that flows through the circuit.

60.A radio set draws a current of 0.36 A for 15 minutes. Calculate the amount of electric charge that flows through the circuit.

61.Potential difference between two points of a wire carrying 2 ampere current is 0.1 volt. Calculate the resistance between these points.

62.A simple electric circuit has a 24 V battery and a resistor of 60 ohms. What will be the current in the circuit? The resistance of the connecting wires is negligible.

1.a set of n identical resistors each of resistance R ohm,when connected in series have effective resistance X ohm and when resistors are connected in parallel have effective resistance as Y ohm.Find the relation between R,X&Y.

2. a wire of resistance 10 ohm is bent in the form of a closed circle.what is the effecti ve resistance between 2 points at the ends of any diameter of the circle

3.Define electrical resistivity.how is it related 2 electrical conductivity of the factors length,area of cross-section,nature of material and temperature.which one can control the resistive value of a conductor.

Aluminium wire of resistance R is pulled so that its length becomes 4 times its orginal length. Find the new resistance of the wire in terms of its original resistance.

pls guys... give me the answer.....!!!!!

a)Derive an expression for the equivalent resistance of three reistors joined in (a)series (b)parallel

b)Derive an expression for electrical energy and electrical power.

Reason: On connecting the resistors in parallel, the potential difference across a resistor is proportional to its resistance.

Choose the correct option

(a) both a and r are true and r is the correct explanation of a

(b) both a and r are true and r is not the correct explanation of a

(c) a is true but r is false

(d) a is false and r is true

Calculate the number of electrons constituting one coulomb of charge.

A wire of length 'l' and resistance 'R' is twisted to make its thickness 2 times. What is the new resistance of the wire ?ANS - R/16 ohm

EXPLAIN

why is argon and nitrogen filled in an electric bulb?

Express Ohm's Law by a mathematical Formula & a graph

33. In the given figure, force on rod A and B are in direction respectively :

(A) Rightward direction, leftward direction

(B) Rightward direction, rightward direction

(C) Leftward direction , leftward direction

(D) Leftward direction, rightward direction

can i download holy faith books.please suggest a site to download it?

two resistors of 10 ohm and 15 ohm are connected in series to a battery of 6V. How can the values of current passing through them be compared?

which has more resistance:100W bulb and 60W bulb?

State and prove the joule's law of heating?

i want to make a working model of hydroelectric power house.Can you pls give the steps to make it and the material required

1) 0.2 A 2) 1.0 A 3) 1.8 A c) 1.9 A

define one volt

(a) 2A. (b)4A. (c)8A. (d)16A

A wire of resistivity p is stretched to double its length . What will be its new resistivity ?

500 Joules of energy is produced each second in a 20 ohm bulb. Find the potential difference across the bulb.

for the circuit shown in this diagram,calculate

1]the resultant resistance.

2]the total current.

3]the voltage accross 7Ω resistor.

The V-I graph of a metallic wire at two temperatures T

_{1}and T_{2 where slope of T}_{2 is greater than slope of T1}Which of the twotemperaturesis higher and why?

The potential at a point 0.1 m from an isolated point charge is +100 Volt. The nature of the point charge is-

a) positive

b) negative

c) zero

d) either positive or zzero

and why?????

plzzz tell..

I have to make a science working model on any topic. What should I make and how?

CALCULATE THE RESISTANCE OF A 2M LONG NICHROME WIRE OF RADIUS 0.321MM.RESITIVITY OF NICHROME IS 15INTO10^-6 OHM METER.IF A POTENTIAL DIFFERNCE OF 10 V IS APPLIED ACROSS THE WIRE ,WHAT WILL BE THE CURRENT IN THE WIRE.Two conducting wires of the same material and of equal lengths and equal diameters are first connected in series and then parallel in a circuit across the same potential difference. The ratio of heat produced in series and parallel combinations would be −

(a) 1:2

(b) 2:1

(c) 1:4

(d) 4:1

Use the following information to answer the next question.

A ceiling fan of 40 W is connected in parallel connection with a fluorescent light bulb of 30 W. They both are connected to a supply voltage of 220 V.

The equivalent resistance of the given combination is

Options132.8 Ω

341.2 Ω

691.4 Ω

724.6 Ω

draw a circiut diagram for the verification of Ohm's law ????

The values of current

Iflowing in a given resistor for the corresponding values of potential differenceVacross the resistor are given below −I(amperes )0.5

1.0

2.0

3.0

4.0

V(volts)1.6

3.4

6.7

10.2

13.2

Plot a graph between

VandIand calculate the resistance of that resistor.(i) What is the purpose of the resistor R?

(ii) Calculate the value of the resistor R,for the proper working of the lamp.

(iii)What is the current flowing through the circuit?

Estimate the average drift speed of conduction electrons in a copper wire of cross sectional area 1 x 10

^{-7}m^{2}, carrying a current of 1.5 A.Assume that each copper atom contributes roughly one conduction electron . The no. of copper atoms per cubic metre is 8.5 x 10^{28}.Name the material used for making the (a) fuse wire (b) connecting wire (c) heating element (d) filament of the bulb..??

Equivalent resistance of the network between X and Y, for R =100 $\Omega $ is

(A) 373.5$\Omega $ (B) 182.5$\Omega $ (C) 212.5$\Omega $ (D) 314.5 $\Omega $

WHAT IS THE RESISTANCE OF AN IDEAL AMMETER AND VOLTMETER?

a wire of resistance 20 ohm is bent to form a closed square. what is the resistance across the diagonal of the square ?

Q1- A refrigerator of capacity 165 litres has a power rating 60 watts. If it runs continously for 5 hours. What unit of electric energy does it convert?

Q2- How many joule are there in one kilowatt-hour? Calculate the cost of operating a 500 watt device for 20 hours at the rate of Rs. 3.59 per unit.

Q3- Which one has a higher resistance 100 watt bulb or a 60 watt bulb each rated at 220 volts?

Q4- A current of 20 amperes is drawn by the starter of a car for 15 seconds. How much electrical energy is drawn from the battery of 12 volts?

Q5- A heater is constructed using a nichrome wire of total resistance 11.00 ohm by applying a potential difference of 220 volts. What is the current drawn by heater? What is power rating of the heater?

Q6- Adomestic consumer uses a refrigerator of 60 watts for 5 hours, an electric iron of 750 watts for half an hour and two 100 watt bulbs for 4 hours everyday. What is the electric energy consumed in a month of 30 days?

A copper wire has a diameter of 0.5 mm and resistivity of 1.6 × 10

^{−8}Ωm. What has to be the length of this wire so that its resistance becomes 10Ω? How much will the resistance change if the diameter is doubled?tell the length of wire?Name a device that helps to maintain a potential difference across a conductor?

true1. insulators do not contain electrons

2. charge carriers in conductors are free electrons

3. insulators always contain more electrons than conductor

4. atoms in a conductor can move about but those in an insulator cannot move

in a household , an electric bulb of 100W is used for 5 hours and an electric heater of 1000 watts for every day . calculate the cost of using bulb and the heater for 30 days if the cost of one unit of electrical energy is 2 rupees

A 10 ohm thick wire is stretched so that its length becomes 3 times.Assuming thet there is no change in its density on stretching,calculate the resistence of the new wire.

A potential difference V is applied across a conductor of length L and diameter D. how the electric field E and resistance R affected when:

(1) V is halved (2) L is halved (3) D is doubled

justify answer in each case

Why is much less heat generated in long electric cables than in filaments of electric bulb?

what is the difference between ammeter and voltmeter.

A given length of a wire is doubled on itself and this process is repeated once again.

By what factor does the resistance of the wire changes ?Resistance of a conductor of length 1m and cross-sectional area of 1mm

^{2 }is 8 ohm.Find the specific resistance of the conductor.a) effective resistance of two 8 ohm resistors in the combination

b) current flowing through 4ohm resistors

c) potential difference across 4ohmresistors

D) power dissipated in 4 ohm resistor

e) difference in ammeter readings if any.

current of one ampere.

(Charge on electron =16x10-19 coulomb)

Two lamps,one rated 100W at 220V and the other 60W at 220v are connected in parallel to a 220v supply.What current is drawn from the supply line?

(A) 5000 Ω (B) 800 Ω (C) 0.8 Ω (D) none of these

The resistance of a wire is R ohm . The wire is stretched to double its length . then the resistance in ohms is

a) R/2

b) 4R

c) 2R

d) R/4

How does mass of wire changes when the current is flowing in the wire?

How does the resistance of a wire vary with its area of cross section?