Select Board & Class
plz explain the ellingham diagram more clearly with examples as it is not clear
what is the role of Depressant in froth floatation method.
principle of froth floatation ?
n-factor of k2cr2o7 in acidic med?
what is the principle of leaching ?
what is the role of collectors in froth floatation?
What is flux ? What is itz role in metallurgy of Iron n Copper ?
What is the meaning of 'the solution is seeded with freshly prepared samples of hydrated Al2O3'.? it is in page 150 of ncert under the heading leaching.
What is Hardy-Schulze rule???
explain the principle of zone refining
Why Zinc oxide can be reduced to the metal by heating with carbon but not Cr2O3
Why is froth floatation process used to extract SULPHIDES????? y sulphides!??!!
what is the principle of electrolytic refining?
Explain the role of NaCN in the extraction of silver.is it necessary to write reaction or fine to write answer asNaCN forms a complex with Ag which again on reaction with Zn gives pure Ag. So, What should I expect with the examiner
why do noble gases have comparatively large atomic sizes?
In the Ellingham Diagram, the slope of the Metals/MetalOxides become more positive after Boiling Point, and thus dG increases,But we know after boiling point, the metal(oxide) becomes liquid/gas and thus its dS values becomes more positive, as dS and T are also increasing as a result T.dS should also increase. As a result from the equation-dG = dH - TdS dG should become more negative, it means the value of dG should decrease and the slope of the line should go downwards, but why is it going upward in the Ellingham diagram? I tried finding this on net, in many books, but didn't find the answer...can anyone/any teacher help me please!?
In the Ellingham Diagram, the slope of the Metals/MetalOxides become more positive after Boiling Point, and thus dG increases,
But we know after boiling point, the metal(oxide) becomes liquid/gas and thus its dS values becomes more positive, as dS and T are also increasing as a result T.dS should also increase. As a result from the equation-
dG = dH - TdS
dG should become more negative, it means the value of dG should decrease and the slope of the line should go downwards, but why is it going upward in the Ellingham diagram?
I tried finding this on net, in many books, but didn't find the answer...can anyone/any teacher help me please!?
limitation of crystal field theory
In Ellingham Diagram, it is mentioned that when the materials melt/vaporize, the entropy change makes the slope of the graph more higher, increasing Gibbs free energy (becomes less -ve).
But, in such cases∆S becomes +ve as the randomness increase due to phase change (solid to liquid or liquid to gas), and according to the equation∆G =∆H - T∆S,∆G should become more -ve! Please explain with help of the equation and do correct my statement.
Outline The Principle Of Refining Of Metals In The Following Methods
(A) Electrolytic Refining
(B) Vapour Phase Refining
(C) Zone Refining
Zone refining (ii) Column chromatography.
i havent understood the basic concept and use of elingham diagram. plz.. explain it simply how to check whch one will be reduced and which one oxidised??
what is the role of graphite rod in the electrometallurgy of aluminium???
upward stream of running water means?
what are froth stabilizers?
why magnesium oxide is used in blast furnace at the walls
why pine oil is added in froth floatation method?
WHAT IS VAN ARKEL METHOD FOR REFINING ZIRCONIUM OR TITANIUM??? PLZZZ ANSER IT ...........
which is the hottest part of the blast furnace?
Can u plz explain me ellingham diagram?Nd how we get to know abt the feasibility??
The process by which Al[OH]3 is converted into Al2O3 IS KNOWN AS:-
[A] Roasting [B] Calcination
[C]Ignition [D] Leaching
What is the role of silica in the extraction of copper from copperpyrite ore?
what is acidic flux and basic flux
outline the principle of the method used for refining of
Out of C & CO , which is a better reducing agent far FeO?
Explain with reason ?
how is wrought iron different from steel???
what are methods of preparing methane in laboratory in large scale?
in ellingham diagram, what does the point of intersection of two lines signify??
explain role:1.CO in the extraction of nickel.
2.zinc in the extraction of silver.
3.iodine in refining of zinconium.
4.depressant in froth-floation method.
5.graphite rods in metallurgy of aluminium.
Explain the role of and write the equations involved :
CO in purification of nickel
Iodine in refining of titanium
Iodine in refining of zirconium
Zinc in extraction of silver
can u give more detailed explanition of hydraulic classifier method
name the common element present in the anode mud in electrolytic refining of copper.why are they so present?
what is froth floatation method ?? plzz explain it with a video if possible.....
Describe the roles of the following:
1. NaCN in the extraction of silver from a silver ore.
2. Iodine in the refining of titanium.
3. Cryolite in the metallurgy of aluminium.
what are limitations of Ellingham diagram?
write chemical equations involved in blast furnance ?
explain Mond process ???
What is the
significance of leaching in the extraction of aluminium?
What is the oxidation state of Fe and Cr in chromite ore ( FeCr2O4 ) ???????
Ans is +3 and +6 but how ....plz anybody plz explain ???????????
what is ores ?
what are the example of acidic and basic flux
explain role:SiO2 in the extraction of copper
Explain the role of NaCN in extraction of silver from silver ore??
What is the role of silica in the metallurgy of copper?
what is the meaning of forth?
1. What is the difference between Hydrometallurgy and Pyrometallurgy?
2. what are the two aspects considered during reduction of metals?
what is the difference between reverberotory furnace and blastfurnace?
which is a better reducing agent at 673k?c and co why?
Why copper matte
is put in silica lined converter?
what is NaCN ???
1) Mention the conditions to maximise the yield of ammonia by Haber's process
Copyright © 2022 Aakash EduTech Pvt. Ltd. All rights reserved.
E.g: 9876543210, 01112345678
We will give you a call shortly, Thank You
Office hours: 9:00 am to 9:00 pm IST (7 days a week)