Call me

Have a Query? We will call you right away.

+91

E.g: 9876543210, 01112345678

We will give you a call shortly, Thank You

Office hours: 9:00 am to 9:00 pm IST (7 days a week)

What are you looking for?

Syllabus

State the principal and working of a meter bridge?

QF-2. A uniform rod is hinged as shown in the figure and is released from a horizontal position. The angular velocity of the rod it passes the vertical position is :

$\left(\mathrm{A}\right)\sqrt{\frac{12\mathrm{g}}{\mathrm{a}\mathcal{l}}}\left(\mathrm{B}\right)\sqrt{\frac{2\mathrm{g}}{3\mathcal{l}}}\left(\mathrm{C}\right)\sqrt{\frac{24\mathrm{g}}{7\mathcal{l}}}\left(\mathrm{D}\right)\sqrt{\frac{3\mathrm{g}}{7\mathcal{l}}}$

On what factors the internal resistence of a cell depends ?

Draw an equipotential surface due to an electric dipole.

why are alloys manganin constantan used to make standard resistance coil?

Q.73. In the following circuit if ${V}_{A}-{V}_{B}$ = 4 V, then the value of resistance X in ohms will be :-

(1) 5

(2) 10

(3) 15

(4) 20

project onto study various factors on which the internal resistance/emf of a cell depends.

Q. . Two cells X and Y are connected to a resistance of 10 ohm as shown in the figure. The terminal voltage of cell Y is:-

(1) zero

(2) 2 V

(3) 4 V

(4) 10 V

Define 1 Ampere.

a wire of radius r has resistance R if is stretched to the wire of r/2 radius then find new resistance value

derivation for ampere circuital law?

How to solve an unbalanced Wheatstone bridge?

how can sensitivity of potentiometer be increased

Solve this :33. If radius of earth reduces by 4% and density remains same, then find escape velocity change.

(1) Reduce by 2% (2) Increase by 2%

(3) Reduce by 4% (4) Increase by 4%

What is the dimensional formula of potential difference

a uniform wire of resistance 36 ohm is bent in tne form of a circle .calculate the effective resistance across the points A and B.

What is the definition of meter bridge?

Q.47. The potential difference between X and Y in volts is :-

(1) 1

(2) -1

(3) 2

(4) -2

What are the conditions for total internal reflection?

29. Gravitational potential in a region is given by v=(3x+4y+12z) J/kg. The modulus of gravitational field at ( x=1, y=0,z=3) is

(1) 20 N/kg (2) 13â€‹ N/kg (3) 12â€‹ N/kg (4) 5â€‹ N/kg

the emf of a cell is always greater than its terminal voltage.why?give reason.

why is potentiometer preferred over voltmeter?

what is the dimension of resistance....????

a copper wire is streched to make it 0.1%lonnger.what is the percentage change in resistance?

A balloon starts rising from ground rest with an upward acceleration 2 m/secsqu. just after 1 sec. a stone is dropped from it the time taken by stone to strike the ground is nearly?

what are the advantages of potentiometer over votlmeter ?

Q. For the circuit shown calculate the potential difference between point B and D.

what is vacus junction?

a. 4L/9

b. 5L/9

c. 7L/18

d. 11L/18

the reading on a high resistance voltmeter when a cell is connected across it is 2.2 v . When the terminal of the cells are also connected to a resistance of 5 v ,the voltmeter reading drops to 6.8 v . Find the internal resistance of the cell?????(1) ${N}_{1}$ > ${N}_{2}$

(2) ${N}_{1}$ > ${N}_{2}$

(3) ${N}_{1}$ = ${N}_{2}$

(4) ${N}_{1}and{N}_{2}$ would be in the vertical directions.

${N}_{1}$ ${N}_{2}$

show that electric field is conservative?

how does drift velocity of electron in a metallic conductor vary with temperature?

the resistance of the platinum wire of a platinum resistance thermometer at the ice point is 5 ohm and at steam point is 5.23 ohm .When the thermometer is inserted in a hot bath , the resistance of the platinum wire is 5.795 ohmcalculate the temprature of the bath

(1) 9

(2) 3

(3) $\frac{1}{9}$

(4) 1

A wire of resistance 8R is bent in the form of a circle. What is the effective resistance between the ends of a diameter AB?

is current is scalar or vector quantity?

how does internal resistance of a cell vary with temperature? pls answer me.

Explain the variation of conductivity nwith temp for (a) A metallic conductor (b) ionic conductor

Then (1) x = y = z (2) x > y > z (3) y > z > x (4) x > z > y

A resistance or R ohm draws a current from a potentiometer.The potentiometer has a total resistance R

_{0}ohm.A voltage V is supplied to the potentiometer .Derive an expression for the voltage fed to the ckt when the slide is in the middle of the potentiometer.$\left[{X}_{CM}=\frac{3AL+2B{L}^{2}}{3\left(2A+BL\right)}\right]$

Two conducting wires X and Y of same diameter but different material are joined in series across the battery. If the number density of electron in X is twice that in Y, fined ratio of drift velocity of electron in two wires

Q.23. What will be the value of maximum acceleration of the truck in the forward direction so that the block kept on the back does not topple?

(1) ag/h

(2) hg/a

(3) ag/2h

(4) h/bg

My Question:

Draw V-I Graph for both ohmic and non-ohmic materials stating one example of each as well.thanks!

The supply voltage to a room is 120V.The resistance of lead wires is 6 ohm.A 60 W bulb is already switched on.What is the decrease of voltage across the bulb when a 240 W heater is switched on in parallel with the bulb?

a)0 V b)2.9 V c)13.3 V d) 10.04 V

In a galvanometer there is deflection of 10 divisions per mA.Thje internal resistance of the galvanometer is 60 ohm.If a shunt of 2.5 ohm is connected to the galvanometer and there are 50 divisions in all,on the scale of galvanometer,what maximum current can this galvanometer read?

MY DOUBT IS:(If wrong plz correct it and explain) Since there are 50 divisions in all in the galvanometer,then maximum current that galvanometer would read is I_{g}=50*1/10=5 mA .But the answer is given 125 mA.How?a wire of 15 ohm resistance is gradually stretched to double its original length. it is then cut into two equal parts. these parts are connected in parallel across a 3 V cell. find the current drawn from the cell

6.If potential of A is 10V, then potential of B is -(A) 25/3 V (B) 50/3 V (C) 100/3 V (D) 50 V

1)60 W bulb will fuse. 2)100 W bulb will fuse 3)both bulbs will fuse.

4)Bulbs will not fuse

A steady current flows in a metallic conductor of non-uniform cross section.Which of these quantities is constant along the conductor-

1)Current

2)Current density

3)Drift speed

4)Electric field

(a) What is the emf of each cell used?

(b) For what current from the cell, does maximum power dissipation occur in the circuit?

(c) Calculate the internal resistance of each cell.

(I) the emf and

(ii) the internal resistance of the cell.

12 identical resistance R each form a cube . Resistance across its face diagonal corners is?

1. a battery has emf 4V and internal resistance r. When tis battery is connected to an external resistance of 2 ohm a current of 1amp, flows in the circuit. How much current will flow if the terminals of the battery are connected directly.

A storage battery of emf 8V and internal resistance 0.5 ohm is being charged by a 120 V d.c supply using a series resistor of 15.5 ohm. What is the terminal voltage of the battery during charging? what is the purpose of having a series resistor in the charging ciruit?

5x10–11 m. Its time period is 1.5x10–16 second. Find current associated with the electron motion

derive the expression for drift velocity in an electric field.

Draw the circuit diagram and using Kirchhorf's laws, calculate the current through each branch of the circuit and potential difference across the 5 ohm resistor.

what are kirchhoff's law?explain them.

give two possible causes for one sided deflection in a potentiometer experiment.

A metal wire of resistance R is cut into three equal pieces that are then connected side by side to form a new wire , the length of which is equal to one third of the orignal length . The resistance of this new wire is ---------------------

1 NEWTON =how many dyne?

Q.53. In the circuit shown in figure, find the current through the branch BD.

(1) 1 A

(2) 5 A

(3) 3 A

(4) 7 A

why is a copper wire used in a sonometer to find the frequency of A.C mains?plz i hv my board practicals 2morow.friends and xperts plz help

what is the main difference between DC n AC current???

The number of free electrons per 10mm of an ordinary copper wire is 2*10^21.

The average drift speed of the electron is 0.25mm/s.The current flowing is:

(a)0.8 A (b)8A

(c) 80 A (d)5A

(e) 0.5A

A cylindrical metallic wire is stretched to increase its length by 5%. Calculate the percentage change in its resistance.