Volume of oxalic acid solution taken in conical flask each time V1mLBurette reading
Burette Initial reading (x)
Burette Final reading(y)
Volume of sodium hydroxide solution used V2 mL = (y–x) mL
Average
1
20 ml
0.0
4.2
4.2
2
20 ml
4.2
8.1
4.1
3
20 ml
8.1
11.4
3.3
3.8
Calculations: Molarity of NaOH solution can be calculated by using the equation: Oxalic acid Sodium hydroxide 2M1V1(Oxalic acid) = a2 M2V2(NaOH) 2 *M/10 * 20 = M2 * 3.8 M2= 1.05 M
Concentration (strength) in g/L = Molarity×Molar mass = 1.05 * 40 = 42.10 g/L Result Concentration of NaOH solution is 42.10 g/L Precautions (a) Always rinse the burette with the solution, which is to be taken in it. (b) Remove the air gap if any, from the burette before titrating the solution. Make sure that the nozzle of burette is also filled. (c) Never forget to remove the funnel from the burette before noting the readings of the burette and ensure that no drop is hanging from the nozzle of the burette. (d) Always read the lower meniscus for all transparent solutions and upper meniscus for coloured solutions. (e) To note the burette readings, place the eye exactly at the level of the meniscus. (f) Never hold the pipette at the bulb. (g) Never use the pipette and burette with a broken nozzle.
What questions can be asked from the above given experiment in chemistry viva?
What is Inert pair effect ? Explain in detail with examples... :]
Compare relative stability of O2+ and O2- using bond order?
Arrange Li2, Li2+ and Li2- in the order of increasing stability....URGENT ANSER NEEDED!!!!!!!!!!!!!!!!!
what are the limitations of valence bond theory?
Using VSEPR theory draw the structure of XeOF2 and ICl4-
The structure and hybridization of N(SiH3)3 is
find bond order and formal charge of SO4-2 and PO4-3
What is hydration energy ?
NH3 has higher boiling point than PH3. Why?
WHAT IS HYBRIDISATION OF C2H2 WITH DIAGRAM
WHY IS KO2 PARAMAGNETIC????
molecular orbital of o2,
WHAT is the formal charge of CO3 ??
what is the energy level diagram of N2 and F2?
BF3 is non polar but NF3 is polar why?
write lewis structure of na2so4
what is the oxidation number of sulphur in H2SO5 plz give explanation in detail
Aim: Determination of the concentration (strength) of a given sodium hydroxide solution by titrating it against a standard solution (M/10) of oxalic acid.
Material Required: Burette, Pipette, Conical flask , Burette stand, Funnel , Measuring flask , • Oxalic acid, Sodium hydroxide solution, Phenolphthalein indicator
Theory : In the titration of a strong acid with a strong base, the amount of acid and base becomes chemically equivalent at the end point and the chemical reaction is called neutralization reaction. Near the end point there is a sudden change in the pH of the solution. If after end point even a small amount of base/acid is added the solution would become slightly alkaline or acidic respectively. In the titration between oxalic acid (weak acid) and sodium hydroxide (strong base), following reaction takes place: In this titration phenolphthalein (HPh) is used as an indicator. The concentration of unknown solution is calculated in g/L. Molarity of the solution can be calculated by using the formula
a1 M1 V1 = a2 M2 V2
where a1 , M1, V1 are respectively basicity, molarity and volume of acid used and a2, M2 and V2 are acidity, molarity and volume respectively of base used in the titration.
Calculations:
Molarity of NaOH solution can be calculated by using the equation: Oxalic acid Sodium hydroxide
2M1V1(Oxalic acid) = a2 M2V2(NaOH)
2 *M/10 * 20 = M2 * 3.8
M2= 1.05 M
Concentration (strength) in g/L = Molarity×Molar mass
= 1.05 * 40
= 42.10 g/L
Result Concentration of NaOH solution is 42.10 g/L
Precautions (a) Always rinse the burette with the solution, which is to be taken in it.
(b) Remove the air gap if any, from the burette before titrating the solution. Make sure that the nozzle of burette is also filled.
(c) Never forget to remove the funnel from the burette before noting the readings of the burette and ensure that no drop is hanging from the nozzle of the burette.
(d) Always read the lower meniscus for all transparent solutions and upper meniscus for coloured solutions.
(e) To note the burette readings, place the eye exactly at the level of the meniscus.
(f) Never hold the pipette at the bulb.
(g) Never use the pipette and burette with a broken nozzle.
What questions can be asked from the above given experiment in chemistry viva?
Write the MO configuration of the following species-
O2 , O2+ , O2- , O22-
Arrange them in order of their decreasing stabilities?
explain the structure of PCl5
suggest working models in chemistry
Discuss the shape of SiCl4, AsF5, H2S, PH3 using VSEPR theory ?
Explain the geometry and hybridisation of [Ni(CN)4]2-????
DRAW THE STRUCTURE OF C2H4 C2H2 (ELECTRONIC DOT STRUCTURE
PCl5 exists but Ncl5 does not why?
how to know whether compound is paramagnetic or diamagnetic if the compound is formed of more than 2 atoms like H20, co2,No2 , So2 ,NH4 etc tell me the rule
arramge in the increasing order of bond angle
NH3, NH4+, NH2-
explain y BeH2 molecule has zero dipole moment although the Be-H bonds are polar...?
In PO43- ION, THE FORMAL CHARGE ON EACH OXYGEN ATOM AND P-O BOND ORDER RESP. ARE
A. -0.75,0.6
B. -0.75,1.0
C.-0.75,1.25
D.-3,1.25
Why the bond angle (H--N--H) in NH4+is greater than NH3?????
Is HI a covalent compound or ionic compound?
Write the molecular orbital configuration of N2 and N2+ . Also calculate their bond order?
plz explain me the lewis dot stucture of NF3 ,CO3 AND HNO3
why KHF2 is known but KHCl2 is not known?
what is positive nd negative electron gain enthalpy
is boric acid a protic acid ,,,,,,,,explain me fast,,,,,i hav my xam on mondayyyyyy
use the M.O theory, explain why Be2 molecule does not exist?
Explain the formation of H2 molecules on the basis of valence bond theory
On what factors do hydration energy & solubility depend ?
Does the hydration energy increase with increase in solubility ?
using hybridization,explain the shape of BF3 molecules?
Give reason why H2+ ions are more stable than H2- though they have the samebond order.
which has lowest bond angle?
AsCl3, SbCl3, PCl3 , NCl3 ( ANSWER=SbCl3) why???
Explain the resonance structures of CO2 & CO2-3 ?
How to find out the geometry of ClO4-
What are electron deficient compounds? Are BCl3 and SiCl4 electron deficient species?
Explain.
the states of hybridization of boron and oxygen atoms in boric acid(H3BO3) ARE resp.
a...sp3 and sp2
b.. sp2 and sp3
c.. sp2 and sp2
d.. sp3 and sp3
Explain why NH3 is pyramidal but BF3 is trigonal planar in structure ???
sp2 hybridisation structure of C2H4????