Call me

Have a Query? We will call you right away.

+91

E.g: 9876543210, 01112345678

We will give you a call shortly, Thank You

Office hours: 9:00 am to 9:00 pm IST (7 days a week)

What are you looking for?

Syllabus

Define magnetic elements of earth?

2.find displacement of particle after time t= 2πm/qB {ans=(2πmvo/qB)(i)}

3. find displacement of particle for any arbitrary time t. {ans= vot i+ (mvo/qB)sin(qBt/m) j + mvo/qB(cos(qBt/m)-1)k

pls explain how to do ???

WAT IS RETENTIVITY AND COERCIVITY

REPLY AS FAST AS POSSIBLE

^{-}^{2 }T. accelarationof particle is found to be a=xi+2j m/s^{2}. Find x.what is the principle of moving coil galvanometer?

Why do magnetic field lines always form closed loops?

an element delta l=delta x l is placed at the origin and carriersa current I=2A.find out magnetic field at point P on y axis at distance of 1.0m due to element delta x=1cm.give also direction of field produced?

what is difference between diamagnetic paramagnetic and ferromagnetic?atleast 10 points.

Two magnets of magnetic moments M and 3

^{1/2 }M are joined to form a cross. The combination is suspended in a uniform magnetic field B. The magnetic moment M now makes an angle θ with the field direction. find the value of angle θ.A 2MeV proton is moving perpendicular to a uniform magnetic field of 2.5 Tesla the force on the proton is ?

_{A}and m_{B}respectively are connected by an arrangement shown in the figure. Calculate the downward acceleration of the block B. Assume the pulleys to be massless.what are eddy currents and its applications???

Derive expression for magnetic dipole moment of an electron revolving around a nucleus

A straight conductor carries a current of 5A an electron travelling with a speed of 5* 10 to the power6 ms to the power -1 parallel to the wire at a distance of 0.1 m from the conductor experiences a force of ?

The susceptibility of a magnetic material is 0.9853. Identify the type of the magnetic material.Draw the modification of field pattern on keeping piece of this material in a uniform magnetic field.

Give 5 differences between a bar magnet and a solenoid with their diagrams?

Working of Cyclotron?

what do you mean by current sensitivity of a moving coil galvanometer ?on what factors does it depends?

a magnetic needle free to rotate in a vertical plane, orients itself vertically at a certain place on earth. what are the values of horizontal component of earth's mag field and angle of dip at that place?

The horizontal component of earth 's magnetic field at a place is B and angle of dip is 60 degrees. What is the value of vertical component of earth 's magnetic field at equator?

This question was asked in 2012 boards.I asked ths question yesterday also and the answer given by you is different from that available on this site where question-answers of previous year board papers are given.

there the answer is given to be zero and i don't undestand how. please review the question and explain how the vertical component of earth's magnetic field is zero at equator.

thank you

true value of dip at a place is 45 degree.the plane of the dip circle is turned through 60 degree from the magnetic meridian.find apparent value of dip?please explain me the question with the help of figure a and give its solution.

Q.9. A particle P is projected from a point on the surface of smooth inclined plane (see figure). Simultaneously another particle Q is released on the smooth inclined plane from the same position. P and Q collide after t = 4 s. The speed of projection of P is :-

(A) 5 m/s

(B) 10 m/s

(C) 15 m/s

(D) 20 m/s

^{-5}Wb in a bar of iron of cross section 0 .2 cm^{2}. Calculate the Permeability and Susceptibility of the bar ?m_{1}>m_{2}, System is held at rest by thread BC. Just after the thread BC is burnt.(1) acceleration of m

_{1}will be equal to zero(2) acceleration of m

_{2}will be downwards(3) magnitude of acceleration of two blocks will be non-zero and unequal

(4) magnitude of acceleration of both the blocks will be $\left(\frac{{m}_{1}-{m}_{2}}{{m}_{1}+{m}_{2}}\right)g$

why a galvanometer is not used to measure current in a given circuit?

two identical charged particles moving with same speed enter a region of uniform magnetic field. if one of these enters normal to the feild direction and the other along a direction at 30'c with the field , what would be the ratio of their angular frequencies?

Q. In which configuration the system is not in equilibrium?

Q. In which configuration is the system in (i) stable, and (ii) unstable equilibrium? Explain.

Q. Which configuration corresponds to the lowest potential energy among all the configurations shown?

A wheel with 8 metallic spokes each 50cm long is rotated with a speed of 120rev./min . The earth's magnetic field at the place is 0.4G and the angle of dip is 60 . Calculate the emf induced between the axle and the rim of the wheel. How will the value of emf be affected if the number of spokes were increased ?

A rod of length L, along East-West direction is dropped from a height H.

if B be the magnetic field due to earth at that place and angle of dip isx, then what is the magnitude of induced emf across two ends of the rodwhen the rod reaches the earth?a) 2.4N

b) 1.2N

c) 0.6N

d) 0.3N

A charge Q moving in a straight line is accelerated by a potential difference V.it enter a uniform magnetic field B perpendicular to its path.

Deduse in terms of B an expearence radius of circular path which is travels

in what respect is a toroid different from a solenoid ? draw and compare the pattern of magnetic field lines in the 2 cases

ans.. 16F

(i) Identify the materials X, Y and Z ?

(ii) Show variation of susceptibility with temperature X?

(iii) Out of Y and Z which of the material will you prefer for making transformer core and why?

a jet plane is travelling west at 450 ms^{-1}. if the horizontal component of earth's magnetic field at that place is 4 * 10^{-4}Tesla and the angle of dip is 30 degrees, find the emf induced between the ends of the wings having span of 30 m.if a magnet is suspended at an angle 30 degree to the magnetic meridian the dip needle makes angle of 45 degree with the horizontal. the real dip is ??

(1)the north pole of one faces the south pole of the other

(2)the north pole of one faces the north pole of the other

A thin bar magnet is cut into two equal parts.the ratio of moment of inertia to the magnetic moment of each part will become?(as compare to original magnet)

solution please.

options-1) 1/2

2)1/4

3)1/8

4)1

Write the expression for the magnetic moment due to a planar square loop of side ‘

l’ carrying a steady current I in a vector form.In the given figure this loop is placed in a horizontal plane near a long straight conductor carrying a steady current I

_{1}at a distancelas shown. Give reason to explain that the loop will experience a net force but no torque. Write the expression for this force acting on the loop.A solenoid has a core of material with relative permability 400. The windings of the slenoid are insulated from the core and carry a current of 2A. If the number of turns is 1000 per metre, calculate

a) H

b) M

c) B

d)the magnetising current I.

why does a freely suspended magnet always points along north- south direction. ?

In figure, pulleys are ideal m

_{1 >}2m_{2}. Initially the system is in equilibrium and string connectingm_{2}to rigid support below is cut. Find the initial acceleration of m_{2}?Image - http://bit.ly/YrAX6M

Question is of Laws of Motion 11th..!!

7) A copper wire having resistance 0.01 ohm in each meter is used to wind a 400 turn

solenoid of radius 1 cm and length 20 cm. Find the e.m.f of a battery which when

connected across the solenoid will causes a magnetic field of 1x10-2 T near the center of

the solenoid.

[ANS: 1 V]

Apparent dips when dip circle is placed in two mutually perpendicular directions are 30 and 45 degree.What is actual dip at that place???

A closely wound solenoid of 2000 turns and area of cross-section 1.6 × 10

^{−4}m^{2}, carrying a current of 4.0 A, is suspended through its centre allowing it to turn in a horizontal plane.(a) What is the magnetic moment associated with the solenoid?

(b) What is the force and torque on the solenoid if a uniform horizontal magnetic field of 7.5 × 10

^{−2}T is set up at an angle of 30º with the axis of the solenoid?distinguish the magnetic properties of dia, para and ferromagnetic substances in term of,

(a) susceptibility

(b) magnetic permeability

(c) coercivity

What is Dip Circle? Explain its working.

Horizontal component of earth's magnetic field at a place is root 3 times its vertical component . what is the value of angle of dip at the place ?

1. Give reason: electric lines of force do not form closed loop while magnetic field lines form closed loop.2. Why do like poles repel each other and unlike poles attract each pole ? Give satisfactory reason.a bar magnet is stationary in magnetic meridian. a similar magnet is kept parallel to it such that their centres lie on their perpendicular bisectors, if the second magnet is free to move then what type of motion will it have....translatory, rotatory or both and why???

What are isogonic isoclinic lines..???

1) An electron and proton moving parallel to each other in the same direction with equal momentum enter into a uniform magnetic field which is at right angle to thier velocites trace their trajectories in the magnetic field.

131. A pair of stationary and infinite long bent wires are placed in the x-y plane. The wire carrying currents of 10 A each as a shown in figure. The segments l. and M are paral el to x-axis. The segment P and Q are parallel to y-axis, such that OS=OR=0.02 m the magnetic field induction at the origin O is .

1) 10

^{3}T 2) 4 x 10^{-3}T 3) 2 x 10^{-4}T 4) 10^{-4}TPlease answer urgently :

26.The following figure shows the variation of intensity of magnetisation versus the applied magnetic field intensity, Hj for two magnetic materials A and B:

(a) Identify the materials A and B.

(b) Why does the material B have a larger susceptibility than A for a given field at constant temperature?

what is the difference between intensity of magnetisation and magnetic intensity?

2)) along its length ????

why is the core of electromagnet made of ferromagnetic material?

A bar magnet of magnetic moment 1.5 J T

^{−1}lies aligned with the direction of a uniform magnetic field of 0.22 T.(a)What is the amount of work required by an external torque to turn the magnet so as to align its magnetic moment: (i) normal to the field direction, (ii) opposite to the field direction?(b)What is the torque on the magnet in cases (i) and (ii)?Sir,

rnA bar magnet is stationary in magnetic meridian. Another similar magnet is kept parallel to it,such that the centre lie on their perpendicular bisectors.If the second magnet is free to move, then what type of motion it will have : translatory , rotatory or both? Explain the answer please.

a coil of 40 ohm resistance, 100 turns and radius 6mm is connected to ammeter of resistance 160 ohm. coilis placed perpendicular to the magnetic field. when coil is taken out of the field 32 microcoulomb charge flows through it. the magnetic flux density is:

A ball of mass m is tied with two strings of equal length on a rod !!! If the rod is rotated with angular velocity w ( omega ) , then ------(1) T1 = T2........(2) T2 is more than T1......(3) T1 is more than T2.......(4) T1 = T2 / 6 ..............(NOTE ----- T1 AND T2 ARE THE TENSIONS OF STRING 1 AND 2 RESPECTIVELY !!! ) KINDLY HELP !!!

deduce an expression for the magnetic dipole moment of an electron orbiting around the central nucleus

Q.8. A particle shows distance-time curve as given in this figure. The maximum instantaneous velocity of the particle is around the point

(1) A

(2) B

(3) C

(4) D